Skip to content
ProjectAdda
Sign in
MECHANICAL ENGG

SHOCK ABSORBERS

0 sold138 viewsUpdated 6 years ago
In the present scenario of automobile industry manufacturers are trying to produce comfortable and safe vehicles which the consumers are looking for. A shock absorber is a damping element of the vehicle suspension, and its performance directly affects the comfortability, dynamic load of the wheel and dynamic stroke of the suspension. The conventional type of shock absorbers has got the main drawback that it causes foaming of the fluid at high speeds of operation. This results in a decrease of the damping forces and a loss of spring control. The gas filled shock absorbers are designed to reduce foaming of the oil and provide a smooth ride for a long period.

You might also like

MECHANICAL ENGG

MECHANICAL ENGG

AUTOMATIC TRANSMISSION IN CAR

An automatic transmission is a type of motor vehicle transmission that can automatically change gear ratios as the vehicle moves, freeing the driver from having to shift gears manually. These are broadly of two types viz., the semi automatic and fully automatic ones. In the first type only clutch is operated automatically, the driver still has to select gears. In the later type which is employed in modern cars, even the gear are changed automatically by a control mechanism which is actuated b

Report
₹599
by EESHAN GUPTA
MECHANICAL ENGG

MECHANICAL ENGG

COMMON-RAIL TECHNOLOGY (CRDI ENGINE)

Common-rail technology is intended to improve the pulverization process. Conventional direct injection diesel engines must repeatedly generate fuel pressure for each injection. But in the CRDI engines the pressure is built up independently of the injection sequence and remains permanently available in the fuel line. CRDI system that uses an ion sensor to provide real-time combustion data for each cylinder. The common rail upstream of the cylinders acts as an accumulator, distributing the fuel

Report
₹499
by EESHAN GUPTA
MECHANICAL ENGG

MECHANICAL ENGG

EXHAUST GAS RECIRCULATION

All internal combustion engines generate power by creating explosions using fuel and air. These explosions occur inside the engine's cylinders and push the pistons down, which turns the crankshaft. Some of the power thus produced is used to prepare the cylinders for the next explosion by forcing the exhaust gases out of the cylinder, drawing in air (or fuel-air mixture in non-diesel engines), and compressing the air or fuel-air mixture before the fuel is ignited.

Report
₹499
by EESHAN GUPTA
MECHANICAL ENGG

MECHANICAL ENGG

HY-WIRE CAR

Hy-wire car has a fuel cell stack, which powers an electric motor connected to the wheels. Instead of mechanical and hydraulic linkages, it has a drive by wire system where a computer actually operates the components that move the wheels, activate the brakes and so on, and based on input from an electronic controller.

Report
₹499
by EESHAN GUPTA